HRX-OM-M090 
Chapter 7   Control, Inspection and Cleaning 
 
7.2 Inspection and Cleaning  HRS Series 
 
 
7-2  
7.2  Inspection and Cleaning 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
7.2.1 Daily check 
Check each item of Table 7-2 below, and if any error is seen, stop the 
operation of the product and turn off the user's power supply, and service 
the product. 
 
Table 7-2    Contents of daily check 
Item  Content of check 
There is no heavy object on the product or 
excessive force on the piping.   
Installation 
condition 
Check the installation 
conditions of the product. 
Temperature and humidity are within the specified 
range of the product. 
Fluid leakage 
Check the connected part 
of piping 
There is no circulating fluid leakage from the 
connected part of piping.   
Fluid amount 
Check the liquid level 
indicator. 
The circulating fluid must enter the scale of ‘’H’’. 
Check the display.  The numbers on the display are clear. 
Operation panel 
Check the function. 
The [RUN/STOP] and [MENU],[SEL],[▼],[▲] 
buttons operate properly. 
Circulating fluid 
temperature 
Check on the operation 
panel. 
There is no problem for use. 
Operating 
conditions 
Check the operation 
condition. 
There is no abnormal noise, vibration, smell and 
smoke.  
Facility water*1  Facility water condition 
Temperature, flow rate and pressure are within the 
specified range. 
∗1 For water-cooled type 
Shut off the power supply of the product when performing cleaning, 
maintenance or inspection. It might cause electric shock, injury or 
burn, etc. 
Replace all panels removed for inspection or cleaning. It might cause 
injury or electric shock if it is operated with the panel removed or 
opeDo not operate switches, etc. with wet hands and do not touch 
the electrical parts such as the power supply plug. It might cause 
electric shock. 
Do not operate switches, etc. with wet hands and do not touch the 
electrical parts such as the power supply plug. It might cause 
electric shock. 
Do not splash water directly on the product and do not wash with 
water. It might cause electric shock and fire, etc. 
Do not touch the fins directly when cleaning the dustproof filter. It 
might cause injury.