SMC Networks HRS012-A*-10-* - Alarm Buzzer Sound Setting; Alarm Buzzer Sound Setting and Checking

HRX-OM-M090
Chapter 5 Display and setting of various functions
HRS Series 5.14 Alarm buzzer sound setting
5-33
5.14 Alarm buzzer sound setting
5.14.1 Alarm buzzer sound setting
This sets whether a warning sound is made or not when alarm signal is
output.
The default setting is buzzer sound ON.
5.14.2 Alarm buzzer sound setting and checking
The table below explains the setting items of the alarm buzzer sound and the
initial values.
Table 5.14-1 List of set alarm buzzer sound
Display Item Contents
Initial value
(Default setting)
Alarm buzzer
sound
Sets
alarm buzzer sound.
ON
1. Press and hold the [MENU] key for approx. 2 sec.
Repeat pressing the key until the setting screen for alarm buzzer sound [
]
appears on the digital display.
PV
SV
PV
SV
PV
SV
PV
SV
Alarm buzzer sound Setting and checking
2. Select alarm buzzer sound from the table below with [▲] key or [▼] key, and confirm by
pressing “SEL”.
Table 5.14-2 List of set value
Set value Explanation
Initial value
(Default setting)
No alarm buzzer sound
Alarm buzzer sound
○
3. Press the [MENU] key once.
Return to the main screen (screen displaying the circulating fluid temperature).
PV
SV
［MENU］
Press
and hold
［MENU］
Press
and hold
［MENU］
Press
and hold