HRX-OM-M090
Chapter 3 Transport and Setting Up
HRS Series 3.2 Installation
3-3
3.2 Installation
Keep the product horizontal to a rigid and flat floor which can resist
the weight of the product, and take measures to prevent the
product from tipping over. Improper installation may cause water
leakage, tipping, damage of the product or injure the operator.
Keep the ambient temperature of the product between 5 to 40
o
C.
Operation below 5
o
C may cause the compressor failure, and
operation above 40
o
C may cause the product to overheat and shut
down.
∗
The operating ambient temperature is 5 to 45deg. C for option G
.
Do not set up the product in places possibly exposed to leakage of
flammable gas. Should any flammable gas stay around the
product, the product may cause a fire.
Do not use the product outdoors. If the product subjected to rain or
water splash it may cause electrical shock, fire or failure.
To Next Page
Loading...
