SMC Networks HRS012-A*-10-* - Page 68

HRX-OM-M090
Chapter 5 Display and setting of various functions
5.6 Run timer, stop timer function HRS Series
5-16
Timer setting example
Now 1H 2H 3H 4H 5H 6H 7H 8H
Stopped Operating
・・・
Run timer
Set to start after 3hours
↑Operating
Now 1H 2H 3H 4H 5H 6H 7H 8H
Operating Stopped
・・・
Stop timer
Set to stop after 3 hours
↑Stopped
Now 1H 2H 3H 4H 5H 6H 7H 8H
Stopped Operating Stopped
・・・
Run timer＋
Stop timer
Set to start after 2 hours
Set to stop after 5.5 hours
↑Operating ↑Stopped
Now 1H 2H 3H 4H 5H 6H 7H 8H
Operating Stopped Operating
・・・
Run timer＋
Stop timer
Set to stop after 2 hours
Set to start after 5.5hours
↑Stopped ↑Operating
z Set while the power supply switch is ON (while the power is
supplied).
z The setting is released when operation is started or stopped by the
timer. Resetting is necessary to use the timer next time.
z Run timer setting is released when the power supply switch or the
customer’s power supply facility is cut, or a power failure occurs.
Please reset.