This is a troubleshooting guide that helps you locate where the problem is when you use the Snapmaker 2.0 3-in-1
Printer, and tells you what to do to solve it. It's divided into two chapters. The first chapter addresses hardware
problems, while the second addresses software problems.
If you have tried all the actions delineated in this guide and still aren't able to solve the problem, we are here to
help. Please contact support@snapmaker.com with a detailed description of the problem and a video of your
troubleshooting process, and send a carbon copy (cc.) to your sales representative( @snapmaker.
com)at Snapmaker. To ensure all the glossaries are consistent with each other, a parts list is included in
Appendix. You can also get more information about specifications in Appendix.
While we strive to provide correct information, Snapmaker doesn't in any way makes any warranty, express or
implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of the information
disclosed in this guide.
Snapmaker reserves the right to update this document without notice. In the meantime, you might also find the
following resources useful.
• For Quick Start Guides:https://snapmaker.com/product/snapmaker-2/downloads.
• For User Manuals: https://snapmaker.com/product/snapmaker-2/downloads.
• For the latest version of the firmware:
https://snapmaker.com/product/snapmaker-2/downloads.
https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/12.
• For the latest version of software:
https://snapmaker.com/product/snapmaker-2/downloads
https://luban.xyz/
https://github.com/Snapmaker/Luban/releases
https://forum.snapmaker.com/t/snapmaker-luban-downloads-and-updates/4949/21.
© 2021 Snapmaker. All Rights Reserved.
To Next Page
Loading...
