Snapmaker A350 - Maintenance Schedule

User Manual |
164
CNC Carving - 06 Maintenance
06 Maintenance
6.1 Maintenance Schedule
This maintenance schedule is for reference only. Should you use the CNC carver more frequently, adjust your
schedule according to your use frequency. Before maintenance, check Snapmaker’s Limited Warranty void your
warranty by self-servicing your CNC carver.
Cut the power supply before maintenance.
Before You Carve
Task See
Check the Cables 6.2.1
Check the Support Platform 6.2.2
Check the CNC Carving Platform 6.2.3
Check the ER11 Nut and CNC Bit 6.2.4
Every Month
Task See
Clean the Linear Modules 6.3.1
Clean the Side Covers 6.3.2
Check the Nuts in the CNC Carving Platform 6.3.3
Every Three Months
Task See
Update the Firmware and Software 6.4