User Manual |
5
Safety Guidelines - Labels on Your Snapmaker
Labels on Your Snapmaker
On the 3D Printing Module
Warns you of the hot surface. Avoid direct contact with the nozzle and hot end during printing or
immediately after printing.
On the Laser Module
Warns you of laser radiation. This is a class 4 laser product. Avoid eyes
and skin exposure to direct or scattered radiation. Wear the Laser Safety
Goggles or use other protective equipment such as the Enclosure during
laser engraving and cutting.
Warns you that laser radiation is emitted from this aperture. Never look
into the aperture or put your body parts under the aperture when the laser
engraving and cutting machine is powered on.
IEC 60825
FDA
FDA
IEC 60825
To Next Page
Loading...
