01 Operating Environment 69
1.1 Work Area 69
1.2 Workbench 69
02 Material Library 70
2.1 Material Overview 70
2.2 Wood 71
2.3 Basswood (1.5 mm) 71
2.4 MDF 72
2.5 Vegetable-tanned Leather (1.5 mm) 73
2.6 Cotton Fabric (0.6 mm) 74
2.7 A4 White Paper (0.1 mm) 75
2.8 White Cardstock (0.28 mm) 76
2.9 Corrugated Fiberboard (3 mm) 77
2.10 Non-transparent Acrylic (2.6 mm) 78
03 How to Laser Engrave and Cut 78
3.1 Laser Engraving and Cutting Workflows 78
3.2 Measure the Focal Length 80
3.3 Calibrate the Camera 92
3.4 Prepare the Material 96
3.5 Connect the Machine to Luban 99
3.6 Prepare the G-code File 101
3.7 Four Modes to Process the File 103
3.8 Transfer the G-code File 104
3.9 Start Engraving and Cutting 107
3.10 Auto Mode and Manual Mode for Laser Engraving and Cutting 112
To Next Page
Loading...
