Snapmaker A350 - Pla

User Manual |
23
3D Printing - 02 Filament Library
2.2 PLA
Filament Properties
Physical Properties
Diameter 1.75 mm
Density 1.2 g/cm
3
Thermal Properties
Melt Flow Index 3.5 g/10 min
Heat Deflection Temperature 53°C (127.4°F)
Mechanical Properties
Flexural Strength 90 MPa (13 ksi)
Flexural Modulus 1,915 MPa (277.7 ksi)
Impact Strength 5.4 KJ/m
2
Elongation at Break 11.8%
Printing Parameters
Printing Temperature 190°C–230°C (374°F–446°F)
Heated Bed Temperature 45°C–60°C (113°F–140°F)
Printing Speed 40 mm/s–100 mm/s
PLA will easily absorb moisture from the air and thus get damp. Store it in a dry place.