Snapmaker A350 - Operating Environment 21; Filament Library; How to 3 D Print; Waste Disposal

01 Operating Environment 21
1.1 Temperature and Humidity 21
1.2 Workbench 21
02 Filament Library 22
2.1 Filament Overview 22
2.2 PLA 23
2.3 ABS 24
2.4 TPU 25
2.5 PETG 25
03 How to 3D Print 27
3.1 3D Printing Workow 27
3.2 Level the Heated Bed 27
3.3 Load the Filament 33
3.4 Prepare the G-code File 37
3.5 Transfer the File and Start Printing 38
3.6 Remove Prints 42
3.7 Filament Runout Recovery 46
3.8 Power Loss Recovery 47
04 Waste Disposal 48
4.1 Packaging 48
4.2 Wasted Filaments 48
4.3 Electronics 48
05 Maintenance 48
5.1 Maintenance Schedule 48
5.2 Before You Print 49