Snapmaker A350 - Cotton Fabric (0.6 MM)

User Manual |
74
Laser Engraving and Cutting - 02 Material Library
2.6 Cotton Fabric (0.6 mm)
Work Parameters
Engraving in Line Mode
Density 5 dot/mm
Work Speed 500 mm/min
Power 90%
Engraving in Dot Mode
Density 5 dot/mm
Work Speed 2500 mm/min
Dwell Time 5 ms/dot
Power 60%
Cutting
Work Speed 200 mm/min
Passes 3
Pass Depth 0.6 mm
Power 100%