User Manual |
26
3D Printing - 02 Filament Library
Density 1.38 g/cm
3
Thermal Properties
Melt Flow Index 20 g/10 min
Heat Deflection Temperature 64°C (147.2°F)
Mechanical Properties
Flexural Strength 68 Mpa (9.9 ksi)
Flexural Modulus 1,800 Mpa (261.1 ksi)
Tensile Strength 49 MPa (7.1 ksi)
Impact Strength 7.6 KJ/m
2
Elongation at Break 225%
Printing Parameters
Printing Temperature 230°C–250°C (446°F–482°F)
Heated Bed Temperature 60°C–80°C (140°F–176°F)
Printing Speed 40 mm/s–100 mm/s
Store PETG in a cool, dry place. Avoid long exposure to air.
To Next Page
Loading...
