User Manual |
79
Laser Engraving and Cutting - 03 How to Laser Engrave and Cut
Use Camera Capture to Start Laser Engraving and Cutting in Luban
Pre-check the Machine
⇩
Measure the Focal Length
⇩
Calibrate the Camera
⇩
Prepare the Material to Engrave or Cut
⇩
Connect the Machine to Luban
⇩
Prepare the G-Code File for Engraving and Cutting
⇩
Start Engraving and Cutting
Set Work Origin to Start Laser Engraving and Cutting on the Touchscreen
Pre-check the Machine
⇩
Measure the Focal Length
⇩
Prepare the Material to Engrave or Cut
⇩
Prepare the G-Code File for Engraving and Cutting
⇩
Transfer the G-code File to the Machine
⇩
Start Engraving and Cutting
To Next Page
Loading...
