Snom D862 - Using the Phone; Making Calls

39
D862 User Manual Using the Phone
Using the phone
This section describes the functions of the phone with the factory default settings. If your phone was
installed and/or set up by someone else, the default settings may have been changed. Please check
with that person or company if the phone does not react as described here.
The caller information displayed on the screen is controlled by a setting on the phone‘s web interface.
The default setting is "Name + Number". To change the setting, click Preferences in the left lateral
menu, then Appearance. In the Interface elements section, select an option from the pull-down menu
Number Display Style. The other options are Full contact, name, number, and number + name.
Making calls
See "Entering numerals, letters, special characters, and symbols" on page 23 for information on
input modes and entering letters, numerals, and special characters.
Selecting identity for current outgoing call
See "Identities/accounts" on page 60 on how to congure identities.
Your current outgoing identity is shown on the left side of the status line. To select another
congured identity, press / on the navigation key.
Using dierent audio devices
Handset
• Pick up the handset, enter the phone number, and press OR
• enter the phone number and pick up the handset.
Headset
Enter the phone number and press .
Speakerphone
Enter the phone number and press Dial or .
Using dierent dialing methods
Auto dial
When this function is enabled, the phone will dial the number on the display when the time span in
seconds specied in this setting has elapsed since the last digit was typed. In the default setting, the
function is switched o. It can be enabled on the web interface. For the settings, see "Auto dial" on
page 69.