Snom D862 - Call Forwarding

66
D862 User Manual Customizing the Phone Settings
1. Click Preferences in the left lateral menu.
2. Click Privacy.
3. Scroll to Allow keyboard locking. The default setting is on.
4. Click o on the toggle switch if you want to turn keyboard locking o.
5. Click Apply.
Automatic keyboard locking after inactivity
In the default setting, the function is disabled (blank text eld). Valid values are positive integers.
Setting on the web interface:
1. Click Preferences in the left lateral menu.
2. Click Privacy.
3. Scroll to Lock keyboard after (s). The default setting is 0 (zero) seconds.
4. Enter the period of inactivity in seconds.
5. Click Apply.
Call forwarding
This feature automatically redirects all or certain incoming calls to another phone or a mailbox. Call
forwarding is congured for each identity separately.
Always
All incoming calls are forwarded to the number of the phone, extension, or mailbox specied as this
function's target.
When busy
Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox
specied as this function's target.
After timeout
When a call starts ringing, the phone will wait for the number of seconds specied as wait time. If the
call has not been accepted by the end of this time period, it is forwarded to the number of the phone,
extension, or mailbox specied as this function's target.
Conguring the settings on the phone: See "Call forwarding" on page 50.
Conguring the settings on the web interface
If your internet telephony provider or your PBX uses codes to turn functions on and o, refer to their
manuals for the codes to enter in On Code and O Code text elds or ask your administrator.