Snom D862 - Auto Dial Target

70
D862 User Manual Customizing the Phone Settings
Note: Do not enter a target unless you want auto dial to be used only for one
particular number. With the additional setting Auto dial target, this function can be
used on phones restricted to dialing a single number, in waiting areas like airport
lounges or waiting rooms, for example. For the settings restricting dialing to a
predened number, see "Auto dial target" on page 70.
1. Open the phone manager and click Preferences.
2. Click Phone behavior.
3. Scroll to Auto dial timeout.
4. Enter the number of seconds in the text eld.
5. Click Apply.
Auto dial target
In the default setting, this function is switched o. When a target has been set, the phone will dial the
number when the time span in seconds specied in Auto dial timeout has elapsed after the receiver
was taken o-hook.
1. Open the phone manager and click Preferences.
2. Click Phone behavior.
3. Scroll to Auto dial target.
4. Enter the phone number in the text eld.
5. Click Apply.