Snom D862 - Blind Transfer

47
D862 User Manual Using the Phone
3. Press Dial, putting the active call on hold.
4. If the third party agrees to accept the call, press Transfer. The call is transferred.
5. If the third does not want to take the call, press Cancel, then Resume to resume the held call.
• With more than one call. The active call will be transferred. If the active call is not the one you
want to transfer, put it on hold, select the other call with / and press Transfer.
1. On the Xfer setup screen, enter the number or select a call from the phone's call list.
2. Press Dial.
3. If the third party agrees to accept the call, press Transfer. The call is transferred.
4. The remaining call on hold or the rst of the remaining calls on hold will then appear on-
screen.
Blind transfer
• Blind transfer of active call
1. With a call on the line, press Transfer. The Xfer setup screen appears.
2. Press Blind xfer.
3. Enter the number or select a call from the phone's call list.
4. Press Blind xfer. The display shows the message Call ended while the call is ringing on the
third party's phone.
• Blind transfer of call waiting
1. If you are in a call and want to transfer a call waiting, press Forward with the incoming call on
the display.
2. On the Forward call screen, enter the number or select a call from the phone's call list.
3. Press Forward. The display shows the message Call terminated while the call is ringing on
the third party's phone.
Note: Your active call remains active while you are transferring the ringing
call.
• Blind transfer of ringing call
1. With a call ringing, press Forward.
2. On the Forward call screen, enter the number manually or select a number from the phone's
call list.
3. Press Forward. The display shows the message Call terminated while the call is ringing on
the third party's phone.