Snom D862 - Page 53

53
D862 User Manual Conguring the Function Keys
keys page when no expansion module is connected.
Settings descriptions:
◦ Context
This setting species which congured identity will be used when executing the functionality
of the key. You may want to use this feature when you have accounts with dierent providers
or when you wish to present dierent identities to certain destinations.
For example: If you have programmed key P2 to speed dial a specic number and you want to
use congured identity 2 to call that number, select congured identity 2 from the drop-down
menu of P2's "Context". When you speed dial the number by pressing key P2, identity 2 will be
used as the outgoing identity.
The default setting is "Active", which means that the identity selected as the phone's outgoing
identity at any given time will be used.
◦ Type
Select the type of functionality from the drop-down list. If you select "Key Event", a drop-
down list with the available key events will replace the text eld under "Number". The default
setting is "line".
◦ Number
Enter one phone number or value for the function or, if the function is key event, select an
event from the drop-down list. Enter phone numbers exactly the way they need to be dialed,
i.e, type the number without spaces or punctuation marks between the digits. For example, a
number with an area code that might conventionally be notated as (617) 555-0704 should be
entered as 6175550704.
◦ Short/Full Label Mode (phone)
Select a mode from the list (see Fig. 3 and 4 on page 26). The default settings for both are
icon and text.
- Icon. The label will display the icon of the functionality mapped onto the key, e.g.,
, if extension; , if speed dial; etc.
- Text. The label will display the text you have entered in the full label text eld or the
number, if no text was entered.
- Icon and text. The label will display the icon of the functionality mapped onto the key and
the text or number.
◦ Short/Full Label (phone), Label (expansion module)
Optional: Enter a name or other descriptive text in the text eld. This is the data displayed on
the key's label area on the phone and on the expansion module's display, respectively. If you
leave the eld blank, the number will be displayed in the key label area.