APPENDIX G: TROUBLESHOOTING 101
SYMPTOM
: While scanning with the CHS, I turned off the
Pocket PC, or my Pocket PC entered suspend mode. Now the CHS
won’t reconnect to my Pocket PC.
POSSIBLE REASONS SOLUTION
There is a problem with the
Widcomm stack on some Pocket
PCs where the CHS can be
discovered but fails to
communicate. Affected units
include the HP iPAQ models
h221X with ROM version 1.10
and h1945.
Soft reset the Pocket PC by
pressing the reset button.
To Next Page
Loading...
