4 | SETUP FOR THE INTERMEC CK30
This chapter explains how to install and
use the Cordless Hand Scanner (CHS) with
the Intermec CK30 mobile computer,
which runs the Windows CE.NET
operating system.
Before you begin the instructions in this
chapter, make sure you have installed the
batteries (and tether, if desired), and
charged the scanner, as described in
Chapter 2, “Hardware Preparation.”
Setup Summary
STEP 1: Install Connect!Agent and SocketScan.
STEP 2: Turn on the CHS.
STEP 3: Connect CHS to CK30.
STEP 4: Open your application.
STEP 5: Scan data into your application.
Application Features
Symbology Selector
Prefixes/suffixes
Power settings
CHAPTER 4: SETUP FOR INTERMEC CK30 31
To Next Page
Loading...
