Socket Series 7 - STEP 3: Turn on the CHS; STEP 4: Start Socketscan

STEP 3: TURN ON THE CHS
Press and hold the small power button for 3 seconds, until
the LED turns blue and the scanner beeps. The LED should blink
blue once every second to show that the Bluetooth radio is on
but not connected.
Time after turning on scanner Bluetooth mode
0-5 minutes Discoverable and connectable
5-10 minutes Connectable
10-20 minutes Not discoverable or connectable
20 minutes Scanner automatically powers off
STEP 4: START SOCKETSCAN
1. Tap Home.
2. In the upper right corner, make sure All is selected.
3. Scroll down and tap on the SocketScan icon.
CHAPTER 6: SETUP FOR PALM OS 67