STEP 1: UNINSTALL OTHER SCANNING SOFTWARE
Remove any bar code scanning software already installed on
your device.
Note: The SocketScan software pre-installed on the SoMo 650
cannot be uninstalled but can be upgraded.
OPTION 1: Uninstall Directly from the Pocket PC
1. Make sure the bar code scanning software is not running.
2. Tap Start | Settings. Tap on the System tab or Control
Panel.
3. Tap on the Remove Programs icon.
4. Use the utility to remove the software.
OPTION 2: Uninstall with the ActiveSync
1. Make sure the bar code scanning software is not running.
2. Use ActiveSync and a serial/USB cable or cradle to make an
active connection between your device and a host PC.
3. On the host PC, open Microsoft ActiveSync.
4. Click Tools | Add/Remove Programs.
5. Use the utility to remove the software.
CHAPTER 3: SETUP FOR WINDOWS MOBILE 15
To Next Page
Loading...
