7 | SETUP FOR RIM BLACKBERRY
This chapter explains how to install and use
the Cordless Hand Scanner (CHS) with a RIM
BlackBerry® Bold™, Curve™ or Pearl™
Smartphone.
Before you begin the instructions in this
chapter, make sure you have installed the
batteries (and tether, if desired), and
charged the scanner, as described in Chapter
2, “Hardware Setup.”
Setup Summary
STEP 1: Install SocketScan software.
STEP 2: Turn on the CHS.
STEP 3: Pair smartphone with CHS.
STEP 4: Start SocketScan
STEP 5: Connect smartphone to CHS.
STEP 6: Open your application.
STEP 7: Scan data into your application.
Application Features
Symbology Selector
Scanner settings
Device bonding
Note: The instructions in this chapter are based on a BlackBerry
Curve 8320 smartphone. Other BlackBerry smartphones may vary.
76
To Next Page
Loading...
