Socket Series 7 - Table of Contents

TABLE OF CONTENTS
COPYRIGHT NOTICE 2
1 | INTRODUCTION 6
Scanner Versions 6
About the Software 6
Package Contents 7
System Compatibility Requirements 7
Product Registration 8
SocketCare™ Service Program 8
Accessories 8
Additional Documentation 8
Hardware Features 9
2 | HARDWARE PREPARATION 11
Installing Batteries and Attaching the Tether 11
Assembling the AC Adapter 13
Charging the Scanner 13
3 | SETUP FOR WINDOWS MOBILE 14
STEP 1: Uninstall Other Scanning Software 15
STEP 2: Install SocketScan and Connect!Agent 16
STEP 3: Start SocketScan 19
STEP 4: Configure Scanner Settings 19
STEP 5: Turn on the CHS 21
STEP 6: Connect Device to CHS 21
STEP 7: Start Your Application 23
STEP 8: Scan Data into Your Application 24
Disconnecting 25
Symbology Selector 26
Scanner Settings 27
Scan Demo 28
Connect!Agent Utility 29
Dual Device Support 30
4 | SETUP FOR THE INTERMEC CK30 31
STEP 1: Install Connect!Agent and SocketScan 32
STEP 2: Turn on the CHS 33
STEP 3: Start SocketScan 34
STEP 4: Connect CK30 to CHS 34
STEP 5: Open Your Application 36
STEP 6: Scan Data into Your Application 36
Disconnecting 37
3