DDAAWW CCoonnttrrooll
DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall33--2288
OOtthheerr uusseeffuull ttrraannssppoorrtt mmooddeess
Half-speed Playback SHIFT + PLAY
Abort Current Record Pass SHIFT + STOP
Cycle through Record Modes (Normal, Quickpunch, TrackPunch, Loop) CTRL + RECORD
Cycle through Machine Control Masters (accessible via the transport window) CTRL + ONLINE
Link or Unlink the Edit and Timelines SHIFT + / (Back slash)
SSeettttiinngg PPrree aanndd PPoosstt RRoollll ((1155))
Hold down ALT and press the PRE or POST button to highlight the left hand numeric field of the pre-roll or
post-roll time window; the time is displayed on Duality SE’s TFT screen in place of the DAW’s timecode position.
The selected numeric field will flash; use the navigation left/right arrow buttons (16) to select a different numeric
field if required, then enter a value on the numeric keypad (18) or use the up/down arrow buttons (16) to increase
or decrease the selected field.
Press ENTER on the numeric keypad (18) to confirm the time. The numeric keypad’s CLR button can be used to
clear the selected time.
SSeettttiinngg ssttaarrtt ((IInn)) aanndd eenndd ((OOuutt)) TTiimmeess ((1155))
Hold down ALT and press the IN or OUT button to highlight the left hand numeric field of the start or end time
window. The time is displayed on Duality SE’s TFT screen in place of the DAW timecode position. The selected
numeric field will flash; use the navigation left/right arrow buttons (16) to select a different numeric field if required,
then enter a value on the numeric keypad (18) or use the up/down arrow buttons (16) to increase or decrease the
selected field.
Press ENTER on the numeric keypad (18) to confirm the time. The numeric keypad’s CLR button can be used to
clear the selected time.
AAuuddiittiioonn ((1155))
This function allows the IN, OUT, PRE and POST points to be checked. Press the AUD button, then press either
the PRE, IN, OUT, or POST button. Press the AUD button again to cancel the function.
PRE Plays from the pre-roll point to the selection start point
IN Plays from the selection start point for the post-roll time
OUT Plays from the end point less the pre-roll time to the end point
POST Plays from the selection end point for the post-roll time
ALT + OPTION + PRE or IN Plays from the selection start point less the pre-roll time to the
selection start time plus the post-roll time
ALT + OPTION + POST or OUT Plays from the selection end point to the selection end point plus
post-roll time.
To Next Page
Loading...
Need help?
General
