WWoorrkkiinngg wwiitthh PPrroojjeeccttss aanndd TTiittlleess
At least one Project and Title must be present before you can store a TR Setup. Select SSL followed by Proj. Now
select New Proj and the system will automatically create a new Project and Title; logically these will be named
Project 1 and Title 1 (if no previous projects exist).
If Projects have been previously created, when you press the Proj key, the screen will display a list of existing
Projects. Use the lefthand encoder to scroll through the list and when you find the Project you require, press the
encoder switch (or soft key below the encoder) that represents the Select function. This makes that Project current
(as indicated by the entry being highlighted in yellow, with the word selected after its name) and reveals the Titles
in that Project. To create a new Title in a Project, select New Title. Titles and Projects are automatically numbered
in sequence of creation. Select Copy Title to copy the selected Title.
Note that the top line of the display always indicates the current Project and current Title. Use the Select rotary
control to scroll through lists of Projects, Titles, etc., and the encoder switch to select them. To return at any time
to the Project list, press the soft key for Back.
SSaavviinngg aa TTRR SSeettuupp
Once a new Title has been created, or a previous Title is selected, press TR followed by Store and the current
console settings will be saved in the next available TR Setup. New Setups are automatically named TR - n starting at
‘1’. If a Setup is deleted (see below) then its number will not be re-used. The only exception to this is if all Setups
are deleted; the numbering will then restart from ‘1’. Setups are saved to Duality SE’s flash memory. They can be
backed up aa part of a console Project - see section 6
44--33
TToottaall RReeccaallll
DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
