34 Chapter 2: Getting Started
Getting Started
To set up OB calculations authors:
Figure 16 Setup Screen: OB Calculations
Gestational Age
Growth Analysis
1 Press the Setup key.
2 Select OB Calculations.
3 In Gestational Age or Growth Analysis lists, select the desired
OB authors.
Selecting an author places the measurement on the calculation
menu and selecting None removes the measurement from the
calculation menu.
More...
More... displays the list of user defined custom measurements and
allows you to associate a custom table for the custom measurement.
This is only available when a user defined custom table has been
created for the custom measurement.
Export
1 Insert a blank CompactFlash card in the back slot of the TITAN
system.
2 Press the Setup key.
3 Select OB Calculations.
4 Select Export from the on-screen menu.
All user defined tables and measurements are copied to the
CompactFlash card.
To Next Page
Loading...
