SonoSite titan - Chapter 3: Imaging

Chapter 2: Getting Started 35
Getting Started
Import
1 Insert the CompactFlash card in the back slot of the TITAN
system.
2 Press the Setup key.
3 Select OB Calculations.
4 Select Import from the on-screen menu.
5 After all user defined tables and measurements are imported,
the system restarts.
Note: All user defined tables and measurements currently on the
system are replaced with imported data.
6 Select Done from the on-screen menu to return to live imaging.
Tables...
Tables... displays system OB tables or is used to create custom OB
tables. See “To view and set up OB custom tables:” on page 37.
Reset
To return settings for this setup page to factory default, select Reset
from the on-screen menu.