Sony HAP-S1 Service Manual

HAP-S1
8
2-22. MAIN BOARD
(Page 23)
2-21. FPGA DSP BOARD
(Page 22)
2-23. POWER TRANSFORMER (T1)
(Page 23)
2-18. SUB FRAME BLOCK
(Page 20)
From previous page.
2-19. SUB FRAME BLOCK WIRES
(Page 21)
2-20. U-COM BOARD
(Page 22)
2-24. ANT HOLDER BLOCK
(LEFT SIDE)
(Page 24)
2-25. ALLEGRO-ANT-L BOARD
(Page 25)
2-26. BRACKET (DCDC-F)
(Page 26)
2-34. DAC BOARD
(Page 30)
2-32. AC INLET 2P (AC1)
(Page 29)
2-33. STANBY BOARD
(Page 30)
2-27. DIGITAL IO BOARD
(Page 26)
2-28. AMP BOARD-1
(Page 27)
2-29. AMP BOARD-2
(Page 28)
2-31. SPTM BOARD
(Page 29)
2-30. HEAT SINK (ALG)
(Page 28)

Sony HAP-S1 Specifications

General

Product color	Silver
Audio formats supported	AAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance	16 Ω
Frequency range	10 - 100000 Hz
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Channels quantity	2 channels
Wi-Fi	Yes
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Automatic synchronization	You don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media type	HDD
Total storage capacity	500 GB
HDCP	No
Headphone outputs	1
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Display diagonal	4.3 \

Weight and Dimensions

Width	- mm
Weight	- g