114
Frame Memory Clip Operations
Chapter 7 Frame Memory
Clip Creation
You save a movie as a clip.
If the number of frame memory clips exceeds 100 single
files (50 pair files), an error appears.
Using the menu to record clips
1
Open the Frame Memory >Clip >Record menu (2523).
2
When [Pair] is off, press a target FM selection button
to select the target.
3
In the folder selection area, select the folder containing
the clip to be recorded.
4
Press [Record Enable], turning it on.
5
To set the clip name, press [Name].
Input the clip name, and press [Enter].
6
To start recording, press [Record Start].
7
To end recording, press [Record Stop].
To set the clip duration
Press [Clip Duration], enter a timecode value or number of
frames, and press [Enter].
Creating and Handling Frame
Memory Folders
You can create, rename, and delete frame memory folders.
Creating a new folder
1
Open the Frame Memory >Folder menu (2551).
2
Select [New].
3
Enter a folder name and press [Enter].
Changing the folder name
1
Select the folder in the Frame Memory >Folder menu
(2551).
2
Press [Rename].
3
Enter the new folder name and press [Enter].
The following names cannot be used for folders:
Default, Flash1, Flash2
CON, PRN, AUX, CLOCK$, NUL, COM0, COM1,
COM2, COM3, COM4, COM5, COM6, COM7,
COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
Deleting a folder
1
Select the folder in the Frame Memory >Folder menu
(2551).
To select all folders, press [All].
2
Press [Delete].
3
Check the message, then press [Yes].
The “Default” folder cannot be deleted.
Clip Output
As with still image operation, you can use the reposition
and lock functions.
For details about the method of operation, 1 “Image
Output” (p. 108).
Notes
Target selection buttons
Pair selection buttons
Frame memory selection area
Folder selection area
Notes
Notes
To Next Page
Loading...
