309
Maintenance
Appendix
Error Messages Shown in the Error Information Menu
If a file transfer related error occurs, the Error Information
menu appears to the following error messages.
If a message other than those above appears, store the data
or recall the data again. If the error message persists,
contact your Sony service representative.
Maintenance
Exchanging Button Labels
A button top puller is supplied with the control panel.
After changing a pattern assigned to a numeric button, you
can use the following procedure to exchange the button
label.
1
Write the new pattern on one of the supplied exchange
labels.
2
Grip the holes on the button sides with the supplied
button top puller and remove the button.
3
Grip the slots on the sides of the white button cap with
the button top puller, so that the cap flexes slightly, and
remove the cap.
4
Remove the old label and insert the new label.
5
Replace the button cap.
6
Replace the button in its original location.
Warning
This operation will be cancelled,
because the register is locked.
Please change the register status to
be unlocked first.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store >Edit
In the above menus, an attempt was made to store to a register that is
locked. Unlock the register before carrying out the store.
Icon Message Description
Error message Error description/measures
[Error] Server Not Respond There is absolutely no response on the LAN from the processor.
Check your LAN connections and the power source of the processor.
[Error] No Space There is insufficient space in the local disk or removable disk.
2 3
To Next Page
Loading...
