302
Error Messages
Appendix
Specified FM OutCh was locked (–7). 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if the
specified frame memory output channel is locked.
Not enough free register area for
Backup or Restore process (–10).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if
there is not enough space to carry out the backup.
Prepare failed, not any file was found
on this board (–11).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if no
image is present.
Backup failed, not prepared yet (–12). 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if not
yet ready.
Backup failed, Clip recall failed (–13). 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if All
One Clip ID Recall failed (internal processing error).
Prepare failed, Clip create failed (–14). 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if All
One Clip creation failed (internal processing error).
Prepare failed, insufficient Clip id
(–15).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if
there are not enough Clip IDs (internal processing error).
Prepare failed, symbol files create
failed (–16).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if
marker frame file creation failed (internal processing error).
Prepare failed, all one Clip recall failed
(–17).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if All
One Clip Recall failed (internal processing error).
ERROR (–19). Bad register number. 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if
Register Number is invalid (internal processing error).
Prepare failed, because there is clip
playing (–22).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Backup] is pressed, this message appears if
processing failed during clip playback.
Change Password
Failed.
The password was not changed.
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
In the above menu, the password was not changed.
Create Key Frame
[Create Key Frame] cannot be
executed.
FMx is not assigned to a user region.
2515: Frame Memory >Still >Create >Key Frame
In the above menu, an attempt was made to execute [Create Key Frame],
but it failed because the frame memory output (FMx) is not assigned to a
user region.
7331.4: Make the assignment in the Engineering Setup >Switcher >Config
>User1-8 Config menu, and try again.
[Create Key Frame] cannot be
executed.
Key Frame Register is locked. (UserX)
2515: Frame Memory >Still >Create >Key Frame
In the above menu, an attempt was made to execute [Create Key Frame]
using a locked register (UserX region). Unlock the register.
[Create Key Frame] cannot be
executed.
Key Frame Register is busy. (UserX)
2515: Frame Memory >Still >Create >Key Frame
In the above menu, an attempt was made to [Create Key Frame] using a
register (UserX region) into which files are being loaded. Try again after file
loading has finished.
[Create Key Frame] cannot be
executed.
Key Frame Register is being edited.
(UserX)
2515: Frame Memory >Still >Create >Key Frame
In the above menu, an attempt was made to execute [Create Key Frame]
using a register (UserX region) with which a keyframe creating or editing
operation is proceeding. Try again after the keyframe operation has finished.
[Create Key Frame] cannot be
executed.
There is no free Key Frame. (UserX)
2515: Frame Memory >Still >Create >Key Frame
In the above menu, an attempt was made to execute [Create Key Frame] for
a UserX region with insufficient usable keyframes.
Icon Message Description
To Next Page
Loading...
