310
Maintenance
Appendix
Care of the Control Panel
Clean the control panel unit, switches, and fader lever, by
gently wiping with a soft dry cloth.
In the event of excessive grime, moisten the cloth with a
little cold or lukewarm water, and wipe gently.
Wring out all surplus water from the cloth before use, to
prevent any surplus water from penetrating the panel.
Moisture inside the panel can cause it to fail.
Never use organic solvents, cleaners, or other chemicals.
Do not wipe with excessive force, as this may scratch the
panel.
Notes
To Next Page
Loading...
