196
Menu Macros
  Chapter 14  Macros
3
In the list on the left, select the button number to be 
assigned.
4
Press [Set].
Executing a menu macro from the shortcut 
menu
1
Open the Home >Favorites >Shortcut menu (0021).
2
Press the group name button.
3
Press the button to which the menu macro is assigned.
To stop a menu macro during execution
Press [MenuMacro Stop].
Creating and Editing a Menu Macro
It is not possible to execute a menu macro during editing. 
To run the macro, first press the [Store] button to end 
editing.
Creating a new menu macro
1
In the Macro >Menu Macro Register >Recall & Run 
menu (5431), select an empty register in the menu 
macro register list.
For details about the method of operation, 
1 “Recalling a Menu Macro Register” (p. 195).
2
Press [Menu Macro Edit].
The Menu Macro Edit menu (7144.2) appears.
The menu macro register is recalled, and the system is 
now in menu macro editing mode.
3
If required, press the [Auto Insert] button to toggle the 
auto insert mode on or off.
In the auto insert mode, when you carry out a menu 
operation, this is automatically recorded as an event in 
the menu macro.
4
Create an event (carry out the menu operation you 
want to record as an event in the menu macro).
For details about menus that can be recorded, 
1 “Menu macro events” (p. 194).
When auto insert mode is on, carrying out a menu 
operation automatically saves the event in a menu 
macro.
When auto insert mode is off, proceed to step 5.
5
When auto insert mode is off, press [Insert Before] or 
[Insert After] to save the event.
6
Repeat steps 4 and 5 to register the required events in 
the menu macro.
7
Set the event execution interval.
The settings are applied to each menu macro register.
8
Press the [Store] button.
9
Enter the menu macro register number as required, and 
press [Enter].
The menu macro is saved with the specified number.
Notes
No. Parameter Adjustment
5Interval Time 
(Sec)
Event interval (seconds)
Menu macro 
register number
Menu macro 
register name
Event number
Remaining Memory
Menu macro register 
configuration list
Menu macro creation event list