Sony MVS-3000 System - ICP-3000 Control Panel

42
Power Supply and Connectors
Chapter 2 Names and Functions of Parts
ICP-3000 Control Panel
Top panel
POWER switch and status indicators A and B
When power is supplied to the AC IN A and B connectors
on the rear panel, the status indicators (green) light. If you
press the POWER switch under this condition, 1 lights
green and the panel turns on.
Shutting down the control panel
Press the [Shutdown] button in the top menu list or top
menu window, and follow the on-screen instructions. After
the menu screen goes fully black, check that the control
panel power switch indicator 1 has gone out.
You can forcibly turn off the power without shutting down
by pressing and holding the POWER for about five
seconds.
• If status indicator A or B does not light even when power
is supplied to the AC IN A and B connectors, there may
be a fault in the power circuits. Disconnect the cords
from the AC IN A/B connectors, and contact your Sony
service representative.
• If you force shutdown without performing shutdown
processing, setting data may not be saved.
• Shut down the control panel before turning off the AC
power supply (or disconnecting the power cord).
POWER switch
Status indicators A and B
Notes