308
Error Messages
Appendix
Rename operation failed (-52). 2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Restore] was pressed in the above menu, directory renaming failed.
Rename operation failed (-53).
Invalid FM OutCh (–6). 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
specified frame memory output channel cannot be used.
Specified FM OutCh was locked (–7). 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
specified frame memory output channel is locked.
Restore failed, some Clip files cannot
be deleted on this board (–8).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
restore failed because a clip file cannot be deleted.
Not enough free register area for
Backup or Restore process (–10).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
there is not enough space to carry out the backup.
Prepare failed, not any file was found
on this board (–11).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if no
image is present.
Prepare failed, insufficient Clip id
(–15).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
there are not enough Clip IDs (internal processing error).
Restore failed, Cannot find symbol
files on this tape (–18).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if a
marker frame file was not found.
ERROR (–19). Bad register number. 2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
Register Number is invalid (internal processing error)
Restore failed, file name already exist,
try to rename but unsuccessful (–20).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if
renaming failed.
Cannot find the File Name Data,
please load the File Name Data first
(–21).
2565: Frame Memory >External Device >Restore from DDR/VTR
In the above menu, when [Restore] is pressed, this message appears if the
file list was not loaded.
Set Time/Date
Error: Wrong Format. 7317: Engineering Setup >System >Maintenance
In the above menu, an incorrect date and time was specified. Specify the
date and time correctly.
Trim
The Start TC or Stop TC is not
properly set.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if neither
Start TC not Stop TC is set.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the
interval between Start TC (or Clip Begin) and Stop TC (or Clip End) is the
entire clip.
2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the
Start TC (or Clip Begin) value is greater than the Stop TC (or Clip End)
value.
This file is locked. 2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the file
is locked.
This file is using for playback. 2522: Frame Memory >Clip >Play
In the above menu, when [Trim] is pressed, this message appears if the file
is being played back.
Icon Message Description
To Next Page
Loading...
