143
Control of VTRs, Extended VTRs, and Disk Recorders
Chapter 10 External Devices
1
Open the Device >DDR/VTR >File List menu (5333).
2
Press [New File].
3
Enter a file name and press [Enter].
You can enter up to eight characters (Fixed 8
Character mode) or 23 characters (Variable Length
mode).
For details about the file name character count mode
in the video disk communications protocol,
1 “Making Detailed Settings on the External Device
Connected to the Serial Port” (p. 232).
When the loaded file is not a target for recording
1
Open the Device >DDR/VTR >File List menu (5333).
2
Press [Unload].
To Next Page
Loading...
