Sony STR-DA5500ES - Page 129

129
GB
Adjusting Settings
1 Press V/v repeatedly to select the
“Seating Position” for which you want to
set the speaker compensation type,
then press .
2 Press V/v repeatedly to select
“Calibration Type” you want, then press
.
• Full Flat
Makes the measurement of frequency
from each speaker flat.
•Engineer
Sets the frequency to match that of the
Sony listening room standard.
• Front Reference
Adjusts the characteristics of all the
speakers to match the characteristics of
the front speakers.
•OFF
Sets the auto calibration EQ to off.
Note
You cannot set “Calibration Type” for “Seating
Position” for which the measurement results have
not been registered.
To confirm the equalizer setting
for the Seating Position
1
Press V/v repeatedly to select the
“Seating Position” for which you want to
confirm the equalizer setting.
2 Press OPTIONS.
The option menu appears.
3 Press V/v repeatedly to select “EQ
Curve,” then press .
4 Press B/b repeatedly to select the
speaker on the screen for which you
want to confirm the equalizer setting.
• FRONT
• CENTER
• SURROUND
• SURROUND BACK
To name the Seating Position
1
Press V/v repeatedly to select the
“Seating Position” for which you want to
name.
2 Press OPTIONS.
The option menu appears.
3 Press V/v repeatedly to select “Name
Input,” then press .
The soft keyboard appears on the screen.
4 Press V/v/B/b and to select a
character one by one.
5 Press V/v/B/b to select “Finish,” then
press .