Sony STR-DA5500ES - Multifunction Remote Control

170
GB
Operating each
component using the
multifunction remote
You can control Sony or non-Sony
components you are using with the
multifunction remote supplied with the
receiver.
The remote is initially set to control Sony
components.
When you change the settings of the remote
according to the components you are using,
you can control non-Sony and other Sony
components that the remote is initially unable
control (page 172).
1 Press the input button that
matches the connected
component that you want to
operate.
2 Press the appropriated buttons
to use the function listed in the
table below.
Note
You may not be able to operate some functions for
the components you are using.
Operating Each Component
Using the Multifunction Remote
Operating the components
connected to the receiver