145
GB
Adjusting Settings
8 Press V/v/B/b and to select a
character one by one to enter the port
number.
9 Press V/v/B/b repeatedly to select
“Finish,” then press .
10Press b.
11Press V/v repeatedly to select “Finish,”
then press .
Lets you enter the Rhapsody Account number
to listen to the Rhapsody Internet radio
service. For details, see “Setting an account”
(page 98). Rhapsody is only available in the
US.
Quick Click settings
Controls components connected to the receiver
using the on-screen remote.
Selects the source component that is to be
operated.
x Preset Mode
Customizes the remote to match the source
components connected to your receiver.
x Learn Mode
Allows the remote learn codes.
x Reset
Resets both programmed codes and learned
codes.
Selects the common component such as a TV,
projector or lights that is to be operated.
x Preset Mode
Customizes the remote to match the common
components such as the TV, the projector and
the lightings connected to your receiver.
x Learn Mode
Allows the remote to learn codes.
x Reset
Resets both programmed codes and learned
codes.
Sets several commands in a sequential order as
a single command.
Rhapsody Account
Source Component
Common Component
Macro Setup
To Next Page
Loading...
