Sony STR-DA5500ES - DVD Player, Blu-Ray Disc Player

37
GB
Getting Started
The following illustration shows how to connect a DVD player, Blu-ray Disc Player.
It is not necessary to connect all the cables. Connect audio and video cords according to the jacks
of your components.
* When you connect a component equipped with an
OPTICAL jack, set “Input Assign” in the Input
menu.
Notes
• To output multi-channel digital audio, set the
digital audio output setting on the DVD player,
Blu-ray Disc Player. Refer to the operating
instructions supplied with the DVD player, Blu-ray
Disc Player.
• Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
Connecting a DVD player, Blu-ray Disc Player
DVD player, Blu-ray Disc Player
ABC
A Optical digital cord (not supplied)
B Coaxial digital cord (not supplied)
C Audio cord (not supplied)
D Video cord (not supplied)
E Component video cord (not supplied)
D
Audio signals Video signals
E