8
GB
Description and location of parts
Front panel
Status of the POWER button
Off
The receiver is turned off (initial
setting).
Press POWER to turn the receiver on.
You cannot turn the receiver on using
the remote.
On/Standby
Press
?/1 on the remote to turn the
receiver on or set it to the standby mode.
When you press POWER on the
receiver, the receiver will be turned off.
To remove the cover
Press PUSH.
When you remove the cover, keep it out
of reach from children.
To open the cover
Slide the cover to the
left.
To Next Page
Loading...
