Sony STR-DA5500ES - Page 166

166
GB
1 Press QUICK CLICK.
The on-screen remote is displayed on the
TV screen.
2 Press V/v/B/b to select MACRO
on on-screen remote.
The macro list appears on the TV screen.
3 Press V/v to select the macro
number you want to start.
The macro starts and executes the
commands in the order you assigned
them.
To input a macro name
1
Press MENU.
The menu is displayed on the TV screen.
2 Press V/v repeatedly to select
“ Settings,” then press or b.
3 Press V/v repeatedly to select “Quick
Click,” then press or b.
4 Press V/v repeatedly to select “Macro
Setup,” then press .
5 Press OPTIONS.
The option menu appears.
6 Press to select “Name Input.”
The soft keyboard appears on the TV
screen.
7 Press V/v/B/b and to select a
character one by one.
8 Press V/v/B/b to select “Finish,” then
press .
The name you entered is registered.
To cancel naming input
Press V/v/B/b to select “Cancel,” then press
.
To erase a programmed macro
1
Press MENU.
The menu is displayed on the TV screen.
2 Press V/v repeatedly to select
“ Settings,” then press or b.
3 Press V/v repeatedly to select “Quick
Click,” then press or b.
4 Press V/v repeatedly to select “Macro
Setup,” then press .
5 Press V/v repeatedly to select the
macro number you want, then press
.
6 Press V/v repeatedly to select the step
number you want, then press .
7 Press V/v repeatedly to select “–” as a
component name, the press .
8 Repeat steps 7 and 8 to clear the
stored macro.
9 Press V/v/b repeatedly to select
“Finish,” then press .
Settings stored as a macro are cleared.
Starting macro play