89
GB
Enjoying Surround Sound
Notes
• HD-D.C.S. does not work when the multi-channel
input is selected.
• HD-D.C.S. does not work when DTS-HD signals
with a sampling frequency of 88.2 kHz and higher
are being received.
• HD-D.C.S. does not work when Dolby TrueHD
signals with a sampling frequency of 176.4 kHz
and higher are being received.
• If you set up the sound field during DTS 96/24
signal reception, the signal will be played back
only at 48 kHz.
• If you set up the sound field effect while the
receiver is receiving signals with a sampling
frequency of 88.2 kHz and higher, the signals will
always be played back at either 44.1 kHz or
48 kHz.
• If there is any noise present, the noise may be
different depending on the sound field you select.
To Next Page
Loading...
