Sony STR-DE985 - Adjusting the level parameters; Initial settings

sound seems to co
from
nside the image reflected on the movie screen.
l%is parameter lets you create the same
sensation in your listening room by shifting the
;ound of the front speakers “into” the screen.
‘DEEP” provides the greatest amount of screen
depth.
billows you turn to the virtual speakers created
‘y “CINEMA STUDIO EX A, B, C” on or off.
The LEVEL menu conlains pammeters that let
you adjust the balance and volumes of each
speaker. The settings are applied to all sound
fields.
Rx3
its up and the first parameter
is displayed.
e setting is entered automatically.
Initial behind
FRONT L-1-R Center
CENTER LEVEL XXX dB
OdB
SURR L LEVEL XXX dB
OdB
SURR R LEVEL XXX dB 083
SURR BACK LEVEL XXX dB 0 dR
S. WOOFER LEVEL XXX dB 0 dB
LFE MIX LEVEL XXX dB” OdB
n RANGE COMP. XXX”
--.
OFF
1) You can set this parameter only when you set
“MENU EXPAND” to “ON” in the CUSTOMIZE
menu (page 44).
and right speakers.
Lets you adjust the Ievel of the center speaker.
Lets you adjust the level of the surround left
speaker.
Lets you adjust the level of the surround right
speaker.
Lets you adjust level of the surround back
speaker.
ust the level of the sub woofer.
Lets you attenuate the level of the LFE (Low
Frequency Effect) channel output from the sub
woofer without effecting the level of the bass
frequencies sent to the sub woofer from the
front, center or surround channels via the
Dolby Digital or DTS bass redirection
circuitry.
e For LFE mix level, ‘0 dB” outputs the full LFE
signal at the mix level determined by the
recording engineer.
a To mute the sound of the LFE channel from the
sub woofer, select “OF. However, the low
frequency sounds of the front, center, or
surround speakers are output from the sub
woofer according to the settings made for each
speaker in the speaker setup (page 19-22).