ow specify the type of decoding for the 2
el sowrce. This receiver incorporates with
Pro Logic II which has movie mode and
mode, and the receiver can reproduce the
me1 sound in 5.1 channel through Dolby
3gic IL
en set to “PRO LOCXC’, the receiver
~onns the Pro Logic decoding. The souxe
xded in 2 channel is decoded into 4
nnels.
en set to TL II MOVJF, the receiver
forms the Pm Logic II movie mode
o&g. This setting is ideal for the movies
oded in Dolby Surround. Besides, this mode
repro&se the sound in 5.1. channel when
thing the videos of old movies or in the
tbed language.
!en set t5 “PL Il MUSIBI1”, the receivex
forms the Pro Logic II music mode
ding. This setting is ideal for the normal
.eo sources, such as CDs.
page 33.
Lets you assign a function to WI
STR-DE985, MULTI CN 1 OF 2). You cannot
assign 7YWNER or PHfXTO.
FOF S’IX-DE985, you cannot assign the same
function to both TICHland2.
apply the last selec a
sowrce whenever it
if you listen to CD
program source, then return to CD, STADIWM
will be applied again.
Lets you tm-0 on the receiver automatical8y
when the component connected via CCXVEXX.
AI cords (see page 24) is turned on and the
playback is started.
When set to “4>pa”, you can save the power
consumption of the receiver dwring standby
IllOde.
the Sony components connected via COmOL
Al cords (see page 14) automatically when the
onent is set to play mode.
display.
Lets you adjust the position of the on-screen
display horizontally.
Lets yaw adjnst the position of the on-screepl
disphy vertically.
Lets yaw select the command mode of the
remote. Change the comd mode when yon
use 2 Sony receivers in the same room.
To Next Page
Loading...
