You can enter a name (index name) of up to 8
characters for preset stations and program
sources. These names (for example, “VHS”)
appear in the receiver’s display when a station
or program source is selected. Note #at no
more than one name can be entered for each
preset station or program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8MM”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MDlDAT jacks (STR-DE985) or MD/TAPE
jacks (SIX-DE885).
The last station you received is tuned in.
If you are not familiar with how to tune in
preset stations, see “Tuning to preset
stations” on page 41.
Turn the jog dial to select a character, then
press > to move the cursor to the next
ition.
iws
Turn the jog dial until
a blank space appears
Press < or > repeatedly until the character
to be changed flashes, then turn the jog dial
US
to select the right character.
When MULTI CH DIRECT (for STR-DE985,
MULTI CH 1 (or 2) DIRECT) is selected, “NAME
IN?” does not appear in the display.
Before you begin, make sure you’ve comrected
all components properly.
You can record on a cassette tape or MiniDisc
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.
player.
* You cannot record a digital audio signal using a
component connected to the analoe TAPE OUT or
MDbAT OUT jacks (STR-DE985) or the analog
MD/TAPE OUT jacks (STR-DE885). To record a
digital audio signal, connect a digital component to
the DIGITAL MD/DAT OUT jacks (STR-DE985)
or the DIGITAL MDEAPE OUT jacks (STR-
DE%).
* Sound adjustments do not affect the signal output
from the TAPE OUT or MD/DAT OUT jacks
(STR-DE9851 or the MD/TAPE OUT jaiks
(STR-DE885).
0 Some sources contain copy guards to prevent
recording. In this case. you may not be able to
record from the sources.
* The analog audio signals of the current function is
output from the
REC OUT iacks.
* Wlien MULTI CHIN (for STR-DE985 MULTI
CH IN I or 2) is selected, the analog audio signals
of the current function is output from the REC OUT
jacks.
* No signals are output from DIGITAL OUT jacks
(MD/DAT OPTICAL OUT (STKDE985) or
MD/TAPE OPTICAL OUT (STR-DE885)) when
you set MULTU2CH ANALOG DIRECT to 2CH
ANALOG DIRECT.
om a VCR, a TV, or an LD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of
YOLK
VCR or LD player if you
need help.
For example, insert the laser d
to record into the LD player.
To Next Page
Loading...
