Command Descriptions
VX4792 User Manual
3-61
OPERation (?)
The OPERation command selects an operator that mathematically modifies the
waveform. The OPERation? query returns the currently selected operation.
SETUP
AMPLitude, FILTer, OFFSet, WAVeform
[CH1:]OPERation { NORMal | EAM }
[CH1:]OPERation?
CH1
:
?
OPERation
<Space>
NORMal
EAM
The choices are described below.
Argument Description
NORMal Applies no operation to the waveform
EAM Multiplies the waveform by the external signal applied through the AM
INPUT BNC connector
OPERATION EAM
selects External AM mode.
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
