Command Descriptions
3-70
VX4792 User Manual
SEQUence:EXPand
The "" command generates a waveform by accessing a sequence
that was written to a specified sequence file, and transferring the data to a
waveform file.
WAVEFORM
SEQUence:DEFine
"" %)" *#&!
%)"
"
$"
*#&!
%)" '(&" %)" !
*#&! '(&" *#&! !
The sequence file and waveform file must be in the internal memory. If you do
not specify a *#&! , a waveform file with the sequence file name
and the “.WFM” suffix, is generated. If the new waveform file has the same
name as an existing file, an error will be detected. After developing a waveform
file from a sequence, the number of waveform points contained within the new
waveform file is equal to the sum of each unique waveform within the sequence,
multiplied by the number of repetitions for each unique waveform.
"" +
develops the sequence file “SQWAVE.SEQ” into a waveform file. In this
example, the resulting waveform file name will default to “SQWAVE.WFM.”
"" ++
develops the sequence file “SQWAVE.SEQ” into the user-named waveform file
“SWAVE01.WFM.”
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
