Command Descriptions
VX4792 User Manual
3-71
*SRE (?)
The common command sets the bits of the SRER (Service Request Enable
Register). The common query returns the contents of SRER.
The power-on default for the SRER is all bits reset if the power-on status flag is
TRUE. If this flag is set to FALSE, the SRER maintains its value through a
power cycle. See Status and Events for more details on the SRER.
STATUS and EVENT
, , , , , , !#,
! "
! "
! "
where the argument must be decimal number from 0 to 255. The SRER bits are
set in binary bit according to the decimal number.
sets the SRER to 48 (binary 00110000), which sets the ESB and MAV bits.
might return which indicates that the SRER contains the binary number
00100000.
Group
Related Commands
Syntax
Arguments
Examples
To Next Page
Loading...
